Modified Sine Wave Power Inverter 200W
Output socket:
Features:
1)Input protections:Polarity reverse / Over and under voltage / Low battery Alarm and shut down
2)Output protections:Short circuit / Overload / Over temperature
3)With power ON/OFF switch and LED indicator
4)Input and output fully isolation
5)Low power consumption(standby)
6)LVD meet EN60950 and E8 mark
7)EMC meet EN61000-6-1-3,EN55022
Specifications:
- Model: CAR200
- Weight: 580g
- Dimension/CTN./Pcs: 58
3038.5cm /28pcs
- Max. continuous output power: 200W
- Max. continuous output power 2H.: 225W
- Surge capability peak output power: 400W
- DC input static current (no load): 
0.4AMP
- AC output wave form: Modified Sine wave
- Normal input voltage range: 11-15V / 2
30V
- High voltage cut off level: 
15V / 30V
- Low voltage alarm: 10.6V
0.3V(DC12V) / 20.5V0.5V(DC24V)
- Low voltage cut off level: 9.5V0.5V(DC12V) / 19.5V0.5V(DC24V)
- Output AC voltage: AC 115V5% RMS / AC 230V 5% RMS
- Output frequency level: 60HZ1Hz / 50HZ
- Overload power range: 200W, 5-30%
- Hi-pot test: PRI/sec, 1500V/AC 5mA/60s
- Temperature protection: 
65
- Full load max. optimum efficiency: 
90%
- AC output short circuit protection: system shut down (no damage)
- Fan run: Working with load
- Fault warning: alarm beep
- LED indicator:
a) Normal: green
b) Fault: red green
- Fuse (spade type): 25A1pcs
- Dimensions (LWH): 1108847mm
- Environmental condition:
a) Operating temperature: -545
b) Operating relative humidity: 10-90% RH
c) Storage temperature: -1050
d) Storage relative humidity: 10-95% RH
