Modified Sine Wave Power Inverter 600W

 

Output socket:

Features:
1)Input protections:
Polarity reverse / Over and under voltage / Low battery Alarm and shut down
2)Output protections:
Short circuit / Overload / Over temperature
3)With power ON/OFF switch and LED indicator
4)Input and output fully isolation
5)Low power consumption(standby)
6)LVD meet EN60950 and E8 mark
7)EMC meet EN61000-6-1-3,EN55022

Specifications:
 - Model: CAR600 
 - Weight: 1250g
 - Dimension/CTN./Pcs: 603545cm / 20pcs 
 - Max. continuous output power: 600W
 - Surge capability peak output power: 1200W 
 - DC input static current (no load): 0.8AMP 
 - AC output wave form: Modified Sine wave 
 - Normal input voltage range: 11-15V / 21-30V 
 - High voltage cut off level: 15V / 30V 
 - Low voltage alarm: 10.6V0.3V(DC12V) / 20.5V0.5V(DC24V) 
 - Low voltage cut off level: 9.5V0.5V(DC12V) / 19.5V0.5V(DC24V) 
 - Output AC voltage: AC 115V5% RMS / AC 230V5% RMS 
 - Output frequency level: 60HZ1Hz / 50HZ 
 - Overload power range: 600W, 5-30% 
 - Hi-pot test: PRI/sec, 1500V/AC 5mA/60s 
 - Temperature protection: 65 
 - Full load max. optimum efficiency: 90% 
 - AC output short circuit protection: system shut down (no damage) 
 - Fan run: Working with load 
 - Fault warning: alarm beep
  - LED indicator: 
    a) Normal: green 
    b) Fault: red green 
 - Fuse (spade type): 40A2pcs 
 - Dimensions (LWH): 19510455mm 
 - Environmental condition: 
    a) Operating temperature: -545 
    b) Operating relative humidity: 10-90% RH 
    c) Storage temperature: -1050 
    d) Storage relative humidity: 10-95% RH

Ask one question about this products

---

Previous Page: Modified Sine Wave Power Inverter 500W
Next Page: Modified Sine Wave Power Inverter 900W